There are three variations of oil rig mud tanks for drill cuttings and solids control. For tanks positioned beneath the drying shakers, sloped bottom tanks are the optimum choice. This proprietary design, available only from Panther, helps the mud flow directly to the suction line. Round bottom and flat bottom tanks are also available to capture cuttings and liquids coming off the drying shakers and centrifuges.
Slope Bottom Tanks are ideal for placement beneath the drying shakers. These tanks are designed to be used under the shale shakers and help the mud flow towards the suction line where it is sent to other equipment for further processing and then reintroduced back into the mud system.
Round Bottom Tanks are optimal for holding either liquids or solids during the solids control process. The design allows for an easy scoop of solids by a track hoe to transfer solids from one tank to another or from a tank to a truck for haul-off and disposal.
Flat Bottom Tanks hold a greater volume and can be used to store either liquids or solids during the solids control process. Depending on the project, this alternative may require fewer tanks on site.
Bulk tanks are different in appearance in that they are vertical standing, similar to a grain silo. Bulk tanks hold barite or bulk gel, both additives used to maintain the drilling mud properties when formation changes are encountered.
Frac tanks hold water or proppant during well fracturing operations. Material from the frac tanks is connected by a hose to a pump that mixes the material to a slurry that is then pumped at high pressure to open the formation and allow gas or oil to flow to the surface. Frac tanks come in a variety of sizes and capacities.
During completion or workover operations, tanks are needed to store the appropriate fluids necessary to help control wellbore pressures and minimize formation damage when re-entering the well.
Once production is established, a full line of production chemicals and additives will be needed to help maintain production. Mud mixing system tanks will be needed to store and mix the chemicals and additives necessary to restore or enhance production levels.
Regardless of the type of tank and application, there are common considerations for all tanks.
At Panther Fluids Management, we manage the operations of wellsite drilling fluids including the handling of liquids and solids in one of our newly designed open top tanks. We select tanks based on the application and project, but will also work with you to provide the right tank for a job already underway. Standard size tanks are in stock and ready for quick delivery to your location. Our mud tanks measure approximately 40 ft long by 8 ft wide and 4.5 ft high. For more unique project requirements, our team can custom design and fabricate a tank to fit your exact specifications and drilling pad footprint. Tanks can be rented, leased or purchased.
In addition to offering a wide variety of tank sizes for any wellsite application, we consult with the operator to design the best fluid system for each well; including everything from discrete services like mud and shaker screens to fluids engineering to complex closed-loop systems for solids control to haul-off and disposal. Our drilling fluid systems are backed by years of experience and have consistently lowered overall mud costs for clients. We understand the challenges of each well, formation and rig and can adapt the fluid system to any changes that may be encountered while drilling.
Contact Panther Fluids Management today for the latest in drilling fluids technology.